Creality · 3D scanner
Creality Sermoon P1S
The Sermoon P1S is the cheaper variant of the Sermoon P1: a handheld scanner with built-in computer, 6-inch touchscreen and two swappable batteries that combines a blue laser with 34 cross lines and near infrared. It weighs 807 g and costs €2,199 in the DE shop.
Ideal for: Makers and small businesses who want to scan technical parts, vehicle parts or people on site without a laptop and process them directly on the device
Price in the manufacturer's shop€2,399As of 26 Oct 2026, can change dailyThere is no manufacturer's shop price for your region, the EU price is shown.
Before buying: Check the PC requirements in the table. Many scanners need a current graphics card and at least 16 GB RAM for processing. Shiny, dark or transparent parts need scanning spray, depending on the technology. More at Preparing the scan.
Suitable for (according to the manufacturer)
- Car parts and vehicle bodies
- technical parts for reverse engineering and inspection
- Holes, slots and recesses (single line)
- People and large objects (NIR)
- Works of art and antiques on site
- dark and metallic surfaces (laser mode)
Pros and cons
Pros
- Scanning and processing entirely on the device with a 6-inch touchscreen, no PC needed
- 34 cross lines with wide-angle mode for large objects, markerless laser mode also available when connected to a PC by cable
- Two swappable batteries and Wi-Fi 7, laser mode up to 110,000 lux ambient light according to the manufacturer
Cons
- No charger included (according to the manufacturer, USB-C with PD 3.0 from 30 W is required)
- According to the manufacturer, lower volumetric accuracy than the Sermoon P1 (0.08 instead of 0.06 mm/m) and 16 instead of 24 GB RAM
- At 807 g, much heavier than the Sermoon S1 (508 g)
Specs
| Price range | €1,200 to €3,000 |
|---|---|
| Price | Manufacturer's shop: €2,399 (As of 26 Oct 2026) |
| Technology | Blue laser light (34 cross lines, 7 parallel lines, 1 single line for deep holes) with wide-angle mode + near-infrared structured light; two removable NIR filters for outdoor scans |
| Accuracy (according to the manufacturer) | up to 0.02 mm (laser), up to 0.075 mm (NIR), under laboratory conditions; volumetric 0.02 mm + 0.08 mm/m (laser) or 0.075 mm + 0.1 mm/m (NIR) |
| Resolution / point distance | 0.05 to 2 mm (laser), 0.1 to 2 mm (NIR) |
| Speed | at the PC up to 100 fps (laser) or up to 30 fps (NIR), without PC up to 60 fps or up to 20 fps; at the PC up to 108,000 points/s (single line), 756,000 (7 lines), 1,836,000 (34 cross lines) and 6,881,000 (NIR), without PC 72,000, 504,000, 1,224,000 and 4,587,000 points/s |
| Working distance | 200 to 550 mm (single line and 34 cross lines), 160 to 400 mm (7 parallel lines), 170 to 1,200 mm (NIR) |
| Capture area (single frame) | Laser: 100 x 128 mm at 160 mm to 500 x 400 mm at 550 mm; NIR: 160 x 130 mm at 170 mm to 975 x 725 mm at 1,000 mm |
| Object size | 5 x 5 x 5 mm to 4,000 x 4,000 x 4,000 mm (minimum volume laser 5 x 5 x 5 mm, NIR 150 x 150 x 150 mm) |
| Tracking | Markers, global markers, markerless (laser; markerless only on a PC via USB cable); geometry, texture (NIR) |
| Colour/texture | yes (colour mapping, 8 white LEDs; camera resolution not specified by the manufacturer) |
| Connectivity | Without a PC via 6-inch touchscreen with on-device processing; on a PC via USB-C (USB 3.0) or Wi-Fi 7 through the scanner's hotspot; two swappable batteries of 3,300 mAh each, up to 2 hours per battery according to the manufacturer; charging via USB-C with PD 3.0, charger of 30 W or more recommended and not included, full in the device in about 1.5 hours; laser outdoors up to 110,000 lux according to the manufacturer, NIR up to 80,000 lux with filter (50,000 lux without) |
| Usable without a PC | yes (see connectivity) |
| Software | On-device software (calibration, scanning, fusion, alignment, meshing, colour mapping; Qualcomm 8-core processor at 3.36 GHz, Adreno 740 GPU, FPGA, 16 GB RAM, 256 GB storage); on a PC CrealityScan (Windows, macOS), Gaussian splatting only on a PC from RTX 2060; export as ASC, OBJ, PLY, 3MF and STL |
| PC requirements | PC mode only. Minimum: Windows 10/11 64-bit, Intel i7 7th gen, NVIDIA graphics card with 6 GB VRAM, from 16 GB RAM; macOS from 12 with Apple M2 and from 16 GB RAM. Recommended: Intel i7 13th gen or newer, NVIDIA RTX 4060 or better (8 GB VRAM), from 32 GB RAM; macOS from 14 with Apple M3 or newer and from 32 GB RAM |
| Scope of delivery | Sermoon P1S 3D scanner, Glass calibration plate, Marker blocks (6 pieces), USB 3.0 Type-C data cable 2 m, Reflective markers 6 mm and 3 mm (20 pieces), Spare battery, Strap, Cleaning cloth, Quick start guide, declaration of conformity, warranty card, NIR filter (2 pieces) |
| Dimensions | 209 × 129 × 53 mm |
| Weight | 807 g |
| Market launch | September 2026 (launch promotion in the Creality shop from 22.09.2026) |
Source: Manufacturer specifications, As of 10/2026.
All 3D printing devices from Creality
More 3D scanners from Creality
Creality CR-Scan Ferret SE
Beginners on a small budget who want to make coarser scans of people and medium-sized objects on a PC
Creality Otter Lite
Makers who want to scan a wide range from small figures to people and car parts and optionally work wirelessly
Creality PIKA
Makers looking for a compact scanner with laser and infrared mode who also want to scan on the go without a laptop
Creality CR-Scan Raptor
Makers who need precise laser scans of small technical parts and work with markers on a PC
Creality CR-Scan Otter
Makers who want to scan everything from small figures to large objects on a PC with an infrared scanner
Creality CR-Scan Ferret Pro
Beginners who want to scan people and medium-sized objects in colour on a budget, also wirelessly with a smartphone
Creality CR-Scan Raptor Pro
Makers who want to capture precise laser scans of technical parts and also larger objects via infrared on a PC
Creality Sermoon P1
Makers and small businesses who want to scan technical parts, vehicle parts or people on site without a laptop and process them directly on the device
Creality Sermoon S1
Makers and small businesses who want to scan everything from small parts to vehicle parts to people with one device on a PC
Creality Sermoon X1
Small businesses and workshops that want to handle inspection tasks and reverse engineering on small to large parts with high volumetric accuracy, also wirelessly