Creality · 3D scanner
Creality Sermoon P1
The Sermoon P1 is a handheld scanner with a built-in computer, a 6-inch touchscreen and two swappable batteries that captures scans without a PC and processes them into finished models. It combines a blue laser (up to 0.02 mm) with near infrared and costs €3,499 in the DE shop.
Ideal for: Makers and small businesses who want to scan technical parts, vehicle parts or people on site without a laptop and process them directly on the device
Price in the manufacturer's shop€3,499As of 26 Oct 2026, can change dailyThere is no manufacturer's shop price for your region, the EU price is shown.
Before buying: Check the PC requirements in the table. Many scanners need a current graphics card and at least 16 GB RAM for processing. Shiny, dark or transparent parts need scanning spray, depending on the technology. More at Preparing the scan.
Suitable for (according to the manufacturer)
- Car parts and vehicle bodies
- technical parts for reverse engineering and inspection
- Holes, slots and recesses (single line)
- People and large objects (NIR)
- Works of art and antiques on site
- black and metallic objects without spray
Pros and cons
Pros
- Scanning and processing entirely on the device with a 6-inch touchscreen, no PC needed
- Three laser modes (22 cross lines, 7 parallel lines, single line for deep holes) plus NIR for people and large objects
- Two swappable batteries and Wi-Fi 7, laser mode up to 100,000 lux ambient light according to the manufacturer
Cons
- Expensive: €3,499 in the DE shop
- In laser mode only marker tracking, so markers are required
- At 830 g considerably heavier than the PIKA (260 g) or Raptor (372 g)
Specs
| Price range | over €3,000 |
|---|---|
| Price | Manufacturer's shop: €3,499 (As of 26 Oct 2026) |
| Technology | Blue laser light (22 cross lines, 7 parallel lines, 1 single line for deep holes) + near-infrared structured light with near and far mode; four lenses |
| Accuracy (according to the manufacturer) | up to 0.02 mm (laser), up to 0.075 mm (NIR), under laboratory conditions; volumetric 0.02 mm + 0.06 mm/m (laser) or 0.075 mm + 0.1 mm/m (NIR) |
| Resolution / point distance | 0.05 to 2 mm (laser), 0.1 to 2 mm (NIR) |
| Speed | on a PC up to 100 fps (laser) or up to 30 fps (NIR), without a PC up to 60 fps or up to 15 fps; on a PC up to 102,000 points/s (single line), 716,000 (7 lines), 1,740,000 (22 cross lines) and 6,881,000 (NIR), without a PC 61,000, 430,000, 1,044,000 and 3,440,000 points/s |
| Working distance | 160 to 400 mm (7 parallel lines), 200 to 550 mm (single line and 22 cross lines), 170 to 400 mm (NIR near), 200 to 1,200 mm (NIR far) |
| Capture area (single frame) | Laser: 85 x 105 mm at 160 mm to 380 x 365 mm at 550 mm; NIR near: 135 x 130 mm at 200 mm to 310 x 265 mm at 400 mm; NIR far: 689 x 375 mm at 500 mm, 1,245 x 754 mm at 1,000 mm, 1,450 x 1,020 mm at 1,200 mm |
| Object size | 5 x 5 x 5 mm to 4,000 x 4,000 x 4,000 mm (minimum volume laser 5 x 5 x 5 mm, NIR 150 x 150 x 150 mm) |
| Tracking | Markers, global markers (laser); markers, global markers, geometry, texture (NIR) |
| Colour/texture | yes (Color Mapping, RGB camera with global shutter, 12 white LEDs; camera resolution not specified by the manufacturer) |
| Connectivity | Without a PC via 6-inch touchscreen with on-device processing; on a PC via USB-C (USB 3.0) or Wi-Fi 7; two swappable batteries of 3,300 mAh each, charging at 65 W (PD 3.0), 80% in 50 minutes according to the manufacturer; battery life not specified by the manufacturer |
| Usable without a PC | yes (see connectivity) |
| Software | On-device software (calibration, scanning, fusion, alignment, meshing, colour mapping; Qualcomm 8-core processor at 3.36 GHz, Adreno 740 GPU, 24 GB RAM, 256 GB storage); on the PC CrealityScan 4 (Windows, macOS); according to the manufacturer, data usable with QuickSurface and Geomagic Design X |
| PC requirements | For PC mode only. Minimum: Windows 10/11 64-bit, Intel i7 7th gen, NVIDIA 1060 (6 GB VRAM), from 16 GB RAM; macOS 12 with Apple M1 and 16 GB RAM. Recommended: Intel i7 from 13th gen, NVIDIA 4060 or better (8 GB VRAM), from 64 GB RAM; macOS 14 or later with Apple M3, M4 or M5 and from 32 GB RAM |
| Scope of delivery | Sermoon P1 3D scanner, Glass calibration plate, USB 3.0 Type-C data cable 2 m, Power supply with plug adapters, Spare battery, Reflective markers 6 mm (10 pieces) and 3 mm (10 pieces), Strap, Cleaning cloth, Quick start guide, declaration of conformity, warranty card, Transport case (according to product page) |
| Dimensions | 209 × 129 × 53 mm |
| Weight | 830 g |
| Market launch | February 2026 (shown at CES in January 2026, market launch on 05.02.2026) |
Source: Manufacturer specifications, As of 10/2026.
All 3D printing devices from Creality
More 3D scanners from Creality
Creality CR-Scan Ferret SE
Beginners on a small budget who want to make coarser scans of people and medium-sized objects on a PC
Creality Otter Lite
Makers who want to scan a wide range from small figures to people and car parts and optionally work wirelessly
Creality PIKA
Makers looking for a compact scanner with laser and infrared mode who also want to scan on the go without a laptop
Creality CR-Scan Raptor
Makers who need precise laser scans of small technical parts and work with markers on a PC
Creality CR-Scan Otter
Makers who want to scan everything from small figures to large objects on a PC with an infrared scanner
Creality CR-Scan Ferret Pro
Beginners who want to scan people and medium-sized objects in colour on a budget, also wirelessly with a smartphone
Creality CR-Scan Raptor Pro
Makers who want to capture precise laser scans of technical parts and also larger objects via infrared on a PC
Creality Sermoon S1
Makers and small businesses who want to scan everything from small parts to vehicle parts to people with one device on a PC
Creality Sermoon X1
Small businesses and workshops that want to handle inspection tasks and reverse engineering on small to large parts with high volumetric accuracy, also wirelessly
Creality Sermoon P1S
Makers and small businesses who want to scan technical parts, vehicle parts or people on site without a laptop and process them directly on the device