Elegoo · FDM printers
Elegoo Centauri Carbon 2
Enclosed CoreXY printer with 256 mm build volume and a hardened 350 °C nozzle. Multi-colour printing with 4 colours is possible with the optional CANVAS module.
Ideal for: Users who want to print ABS, ASA or fibre-reinforced filaments in addition to PLA and PETG
Enclosed printersCoreXY printersMulticolour printing
Price in the manufacturer's shop€349As of 26 Oct 2026, can change dailyThere is no manufacturer's shop price for your region, the EU price is shown.
Pros and cons
Pros
- Enclosed build volume with activated carbon/HEPA filter
- Hardened nozzle up to 350 °C
- 121-point levelling and built-in camera
Cons
- Chamber only passively heated
- TPU with CANVAS only usable after conversion
- High weight and large footprint
Specs
| Price range | €200 to €400 |
|---|---|
| Price in the manufacturer's shop | €349 (As of 26 Oct 2026) |
| Design | CoreXY |
| Enclosure | enclosed, chamber passively heated |
| Build volume | 256 × 256 × 256 mm (16.8 l) |
| Dimensions | 500 × 480 × 743 mm |
| Weight | 19.35 kg |
| Speed (max.) | 500 mm/s |
| Acceleration (max.) | 20,000 mm/s² |
| Nozzle (max.) | 350 °C |
| Print bed (max.) | 110 °C |
| Extruder | Direct drive (dual-gear) with hardened nozzle, filament sensor and clog detection |
| Calibration | Fully automatic, 121 measuring points, automatic Z offset |
| Multi-colour printing | optional with CANVAS (4 colours, RFID detection) |
| Materials (according to the manufacturer) | PLA, PETG, TPU, ABS, ASA, PC, PA, CF/GF filaments |
| Camera | yes, chamber camera (resolution not specified by the manufacturer) |
| Connectivity | Wi-Fi, USB, app |
| Display | 5" touchscreen |
Source: Manufacturer or retailer specifications, As of 10/2026.
Differences from the predecessor Elegoo Centauri Carbon
- Higher nozzle temperature: 350 instead of 320 °C
- Multi-colour printing with CANVAS system as standard (launch only as a combo)
- Motorised vents for automatic control of the build volume temperature
- 5-inch touchscreen instead of 4.3 inch; build volume unchanged at 256 × 256 × 256 mm
Specs Elegoo Centauri Carbon · Compare both directly · Source: all3dp.com
Centauri Carbon 2 compared
Elegoo Centauri Carbon
Centauri Carbon 2 vs.Bambu Lab P2S
Centauri Carbon 2 vs.Anycubic Kobra S1
Centauri Carbon 2 vs.Bambu Lab P1S
Centauri Carbon 2 vs.Elegoo Centauri 2
Centauri Carbon 2 vs.Creality K2
More printers from Elegoo
Elegoo Centauri Carbon
For the price-conscious who also want to print ABS, ASA or carbon filaments
Elegoo Centauri 2
Users who mainly print PLA, PETG and TPU and can do without an enclosure and camera
Elegoo Neptune 4 Pro
Beginners on a small budget who print PLA and PETG
Elegoo Neptune 4 Plus
Users who print larger parts from PLA or PETG
Elegoo Neptune 4 Max
Users who print very large single parts in one piece