Elegoo Centauri Carbon vs. Elegoo Centauri Carbon 2
Both printers compared directly. The better value is marked in green, where this can be determined objectively.
The key differences
- Both are roughly on par in build volume.
- The Elegoo Centauri Carbon 2 reaches higher nozzle temperatures (350 °C), which makes it better suited to engineering filaments.
- Multicolour printing is only possible with the Elegoo Centauri Carbon 2 (optional with CANVAS (4 colours, RFID detection)).
| Elegoo Centauri Carbon | Elegoo Centauri Carbon 2 | |
|---|---|---|
| Price range | €200 to €400 | €200 to €400 |
| Price in the manufacturer's shop | €309 (was €437.99), sold out (As of 26 Oct 2026) | €349 (As of 26 Oct 2026) |
| Design | CoreXY | CoreXY |
| Enclosure | enclosed | enclosed, chamber passively heated |
| Build volume | 256 × 256 × 256 mm (16.8 l) | 256 × 256 × 256 mm (16.8 l) |
| Dimensions | 398 × 404 × 490 mm | 500 × 480 × 743 mm |
| Weight | 17.5 kg | 19.35 kg |
| Speed (max.) | 500 mm/s | 500 mm/s |
| Acceleration (max.) | 20,000 mm/s² | 20,000 mm/s² |
| Nozzle (max.) | 320 °C | 350 °C |
| Print bed (max.) | 110 °C | 110 °C |
| Extruder | Direct drive, hardened dual gears | Direct drive (dual-gear) with hardened nozzle, filament sensor and clog detection |
| Calibration | automatic, 121 measuring points, Z offset | Fully automatic, 121 measuring points, automatic Z offset |
| Multi-colour printing | no | optional with CANVAS (4 colours, RFID detection) |
| Materials (according to the manufacturer) | PLA, PETG, TPU, ABS, ASA, PET, PC, PA, CF/GF filaments | PLA, PETG, TPU, ABS, ASA, PC, PA, CF/GF filaments |
| Camera | yes, in the build volume, timelapse | yes, chamber camera (resolution not specified by the manufacturer) |
| Connectivity | Wi-Fi, USB | Wi-Fi, USB, app |
| Display | 4.3" touchscreen | 5" touchscreen |
Who is which one suitable for?
Elegoo Centauri Carbon
For the price-conscious who also want to print ABS, ASA or carbon filaments.
- Enclosed and CoreXY at an entry-level price
- High nozzle temperature, engineering filaments too
Elegoo Centauri Carbon 2
Users who want to print ABS, ASA or fibre-reinforced filaments in addition to PLA and PETG.
- Enclosed build volume with activated carbon/HEPA filter
- Hardened nozzle up to 350 °C
Facts, not a buying recommendation. This page summarises manufacturer specifications and our assessment. If we recommend a device, it is explicitly marked “Our recommendation”. Figures marked ◇ do not come from the manufacturer; the source is linked. How we work