Elegoo · FDM printers
Elegoo Neptune 4 Pro
Open bed slinger with Klipper firmware and a 225 × 225 × 265 mm build volume. Network connection only via LAN.
Ideal for: Beginners on a small budget who print PLA and PETG
Price in the manufacturer's shop€219 (was €299)As of 26 Oct 2026, can change dailyThere is no manufacturer's shop price for your region, the EU price is shown.
Pros and cons
Pros
- Segmented heated bed with two zones
- Automatic levelling with 121 points
- Klipper firmware with network printing via LAN
Cons
- No Wi-Fi
- Open frame, of limited suitability for ABS and ASA
- Bed slinger design limits the practically usable speed
Specs
| Price range | €200 to €400 |
|---|---|
| Price in the manufacturer's shop | €219 (was €299) (As of 26 Oct 2026) |
| Design | Bed slinger |
| Enclosure | open |
| Build volume | 225 × 225 × 265 mm (13.4 l) |
| Dimensions | 475 × 445 × 515 mm |
| Weight | 8.9 kg |
| Speed (max.) | 500 mm/s |
| Acceleration (max.) | not specified by the manufacturer |
| Nozzle (max.) | 300 °C |
| Print bed (max.) | 110 °C |
| Extruder | Direct drive with dual-gear drive |
| Calibration | automatic, 121 measuring points (11 × 11) |
| Multi-colour printing | no |
| Materials (according to the manufacturer) | PLA, PETG, TPU, ABS, ASA, Nylon (ABS, ASA, Nylon only to a limited extent with an open build area) |
| Camera | no |
| Connectivity | USB, LAN (no Wi-Fi) |
| Display | 4.3-inch capacitive colour touchscreen, detachable |
Source: Manufacturer or retailer specifications, As of 10/2026.
Neptune 4 Pro compared
More printers from Elegoo
Elegoo Centauri Carbon
For the price-conscious who also want to print ABS, ASA or carbon filaments
Elegoo Centauri Carbon 2
Users who want to print ABS, ASA or fibre-reinforced filaments in addition to PLA and PETG
Elegoo Centauri 2
Users who mainly print PLA, PETG and TPU and can do without an enclosure and camera
Elegoo Neptune 4 Plus
Users who print larger parts from PLA or PETG
Elegoo Neptune 4 Max
Users who print very large single parts in one piece