Bambu Lab · FDM printers
Bambu Lab A2L
Open bed slinger with a 330 x 320 x 325 mm build volume, available since June 2026. Multi-colour printing is possible with AMS lite or AMS, high-temperature filaments such as ABS, ASA, PA or PC are not supported.
Ideal for: Users who print large parts from PLA or PETG and optionally want to work in multiple colours
Open printersBed slingerMulticolour printing
Price in the manufacturer's shopfrom €379As of 7 Oct 2026, can change dailyThere is no manufacturer's shop price for your region, the EU price is shown.
Pros and cons
Pros
- Large build volume for a bed slinger
- Adaptive vibration compensation
- Many sensors for error detection
Cons
- Heated bed only up to 80 °C
- No enclosure, no high-temperature filaments such as ABS, ASA, PA or PC
- Camera with a low frame rate
Specs
| Price range | €200 to €400 |
|---|---|
| Price in the manufacturer's shop | from €379 (As of 7 Oct 2026) |
| Design | Bed slinger |
| Enclosure | open |
| Build volume | 330 × 320 × 325 mm (34.3 l) |
| Dimensions | 544 × 529 × 505 mm |
| Weight | 12.8 kg |
| Speed (max.) | 500 mm/s |
| Acceleration (max.) | 10,000 mm/s² |
| Nozzle (max.) | 300 °C |
| Print bed (max.) | 80 °C |
| Extruder | Direct drive with servo motor (PMSM, closed loop), filament sensor, clog and tangle detection |
| Calibration | fully automatic calibration, sensor type: not specified by the manufacturer |
| Multi-colour printing | optional with AMS lite (4 colours), up to 19 colours with four AMS and one AMS lite |
| Materials (according to the manufacturer) | PLA, PETG, TPU, PVA, PLA-CF, PETG-CF |
| Camera | yes, 1080p (1920×1080), without AI detection |
| Connectivity | Wi-Fi, microSD, app |
| Display | 3.5-inch touchscreen (320×240) |
Source: Manufacturer or retailer specifications, As of 10/2026.
A2L compared
More printers from Bambu Lab
Bambu Lab A1
Beginners and hobby makers who want good results quickly and, if needed, multi-colour printing
Bambu Lab P2S
Ambitious hobby makers and small businesses who print a lot and in a wide variety of ways
Bambu Lab A1 mini
Beginners, children's rooms and craft rooms with little space
Bambu Lab P1S
Anyone who wants a proven enclosed printer at a lower price
Bambu Lab X1 Carbon
Buyers of used devices and anyone who wants to compare an existing device with current models
Bambu Lab H2D
Small businesses and heavy users who print engineering materials and material combinations
Bambu Lab H2S
Users who want to print large single parts from engineering filaments such as PA, PC or PPS
Bambu Lab H2C
Users who often print in multiple colours or with several materials and want to reduce purge waste
Bambu Lab X2D
Users who want to combine two materials, such as model and soluble support material, in a compact enclosure
Bambu Lab P1P
Users who want to keep running a used or existing device