xTool P2S vs. xTool P3
Both lasers compared directly. The better value is marked in green, where this can be said objectively.
The key differences
- The xTool P2S is in a lower price class (€1,500 to €3,000) than the xTool P3 (over €5,000).
- The xTool P3 has the more powerful main source (80 W optical).
- The xTool P3 has the larger work area (915 × 458 mm).
- The xTool P3 is rated as laser class 1. According to the manufacturer, the xTool P2S is Class 4 (class 1 version available), so you need laser safety glasses for the matching wavelength.
- According to the manufacturer, the xTool P3 is faster (up to 1,200 mm/s instead of 600 mm/s). This saves time, especially on large engravings.
| xTool P2S | xTool P3 | |
|---|---|---|
| Price range | €1,500 to €3,000 | over €5,000 |
| Price in the manufacturer's shop | €2,999; Pre-order, sold out (As of 26 Oct 2026) | €6,539 (As of 26 Oct 2026) |
| Laser type | CO₂ laser | CO₂ laser |
| Laser source | CO₂ laser tube 55 W | CO₂ laser 80 W; optional 5 W infrared 1064 nm |
| Power (optical, main source) | 55 W | 80 W |
| Work area | 600 × 305 mm | 915 × 458 mm |
| Dimensions | 1000 × 639 × 268 mm | 1250 × 780 × 496 mm |
| Weight | 45 kg | 105 kg |
| Construction type | Gantry | Gantry |
| Enclosure | enclosed | enclosed |
| Laser class | Class 4 (class 1 version available) | Class 1 |
| Speed (max.) | 600 mm/s | 1.200 mm/s |
| Cutting according to the manufacturer | up to 20 mm clear acrylic and 18 mm solid wood in a single pass; plywood up to 12 mm recommended | up to 20 mm basswood and 25 mm acrylic in a single pass (manufacturer's statement) |
| Air Assist | integrated (two-cylinder pump, 200 kPa) | integrated (up to 30 l/min, 200 kPa) |
| Camera | yes, two 16 MP cameras (overview and close-range) | yes, 16 MP overview camera, 5 MP close-range camera and two side cameras |
| Fume extraction | built-in exhaust fan with exhaust port, air purifier (SafetyPro AP2) optional | Inline fan IF2 2.0 included, air purifier AP2 Max optional; integrated CO₂ fire extinguishing system and water cooler |
| Rotary attachment | optional (RA3) | optional (RA3) |
| Software | xTool Studio (XCS), LightBurn (without camera and autofocus) | xTool Studio |
| Connectivity | USB-C (retailer also lists Wi-Fi and Ethernet) | USB, Wi-Fi (2.4 and 5 GHz), Bluetooth |
| Materials (according to the manufacturer) | Wood, Plywood, Acrylic, Fabric, Leather, EVA foam, Felt, Plastic, Rubber, Paper, Cork, Cardboard, Glass (engraving only), Anodised metal, Stainless steel (marking only with coating) | Wood, Plywood, Acrylic, Fabric, Leather, PU, Bamboo, Glass, Metal (with IR module), Plastic (with IR module) |
Who is which one suitable for?
xTool P2S
Makers and small businesses who regularly cut acrylic and thicker wood.
- cuts clear acrylic, which diode lasers cannot do
- AutoPassthrough for workpieces up to around 3 m long
xTool P3
Workshops and businesses with large-format CO₂ jobs.
- large work area of 915 x 458 mm with class 1
- AutoLift base with 220 mm height and integrated fire suppression
Facts, not a buying recommendation. This page summarises manufacturer specifications and our assessment. If we recommend a device, it is explicitly marked “Our recommendation”. Figures marked ◇ do not come from the manufacturer; the source is linked. How we work